Product Search:
Product details
>Pumps / Gears / Gears Pumps

Gears Pumps / GPX Series®


KCB, 2CY KCB, 2CY GEAR OIL PUMP

KCB, 2CY type gear oil pump is a horizontal rotary pump.
Working pressure is generated by two mutually meshing gears.
This pump is suitable for conveying a variety of liquid lubrication.
E.g.: Crude oil, diesel oil, lubricants, oil-type liquid. Copper gear can be used for transportation of low flash point liquid.
E.g.: Gasoline, bensene. Stainless steel type is suitable for weak corrosive liquid and beverage. Normally the temperature of the liquids liquid should not be over 70°C. High temperature material can resist =300°C.



2CY GEAR LUBRICATING PUMP

2CY series gear lubricating pump is mainly used to carry the lubricator in various lubricating system of mechanical equipments, also it`s suitable to carry the oils with the lubricational feature and their vicosity should be below 10°E (75c.s.t.) And the temperature less than 300°C, furthermore, the gear pump in stainless steel can transport edible oils, beverages and so on. Combine with the copper gear, it can transmit the low-flash point liquid, such as the gasoline and benzol, etc.



YCB HEAT PRESERVATION SPECIALTY PUMP

YCB heat preservation specialty pump is a patented pump which is newly designed by UNIVERSAL PROCESS EQUIPMENT, INC. according to the demand of international market, focusing on the merits of gear pump, chemical pump, high viscosity pump, heat preservation pump and self priming pump, etc.

It is suitable to pump resins, rubber, chemical raw materials and fluid heat needed in industries of chemical, petroleum, pharmaceutical, food, metallurgy, rubber, temperature =400°C.



CB-B(S) MICRO GEAR OIL PUMP

CB-B Gear oil pump uses two gyres gear to translate engine power which is produced by the motor into hydraulic pressure power, and this power is used in to a hydraulic pressure system of machine tool and other machine.

When it is equiped with motor, call “S” type gear oil pump.



BB,BBG INNER CLUTCH CYCLOID GEAR PUMP

BB,BBG cycloid gear pump is a capacitance inner clutch gear pump, its inner gear (outer rotor) is a short amplitude outer cycloid new type gear pump. Relief valve can be installed with pump.

It can be widely used in low pressure system because of its simple structure, low noise, steady and flat oil-line and good selfpriming performance high speed characteristic, it can be used as the clynastic pump or lubricating pump and cooling pump. This pump is suitable for transmitting all kinds of oil.



YHCB ROUND ARC GEAR OLL PUMP

YHCB series round arc gear oil pump is mainly for carrying the various fluidities with the viscosity of 5-1500c.s.t and without the solid particles and noncorrosion. For example: gasoline, Kerosene and diesel fuel and mechanical lubricator.so that`s the premium choice for the tank and petroleum corporations. Appropriate concentration of acid, alkali, benzene, formaldehyde, 2 formaldehyde, alcohols, ketones, esters, chemical medium can be pumped with the use of different materials of spares.

This pump adopting dualarc gear is the latest products necessary to the development of industrial oil pump, which is a special gear pump with high efficiency and has the following merits such as large capacity, high head, small volume, low noise, low rotary speed for input, strong selfpriming, convenient mounting and maintaining and so on.



WCB PORABLE GEAR PUMP

WCB oil pump can carry the pure and neutral oil (e.g.: Engine oil, kerosene, diesel fuel etc and various plant oils) with the viscosity of 1-8 °E from one container to another, it can improve the working efficiency, reduce the labor strength, therefore, it`s suitable for the oil transportation in commerce, industry, acriculture and son.

Product brochure

Copyright © 2013 Universal Process Equipment. And its licensors. All rights reserved.     > Manufacturers of Quality Pumps > Controls and Systems.